Deburring & Edge Finishing Equipment
Fine blanking produces a near-vertical shear face across most of the part thickness, but a small residual burr on the die-side edge is normal. Our deburring cells remove it consistently to your drawing's edge-condition callout.
Vibratory Deburring
Bulk processing for small-to-medium parts, using media selected for the target radius and surface finish.
Brush & Belt Deburring
In-line or offline brush stations for parts requiring directional, controlled edge break without part tumbling.
Centrifugal Disc Finishing
High-throughput edge finishing for medium volumes with tighter cycle-time targets than vibratory alone.
Matching Equipment to Your Edge Spec
- Target burr height and edge-break radius from your drawing
- Part geometry - nested parts vs. individually handled large components
- Required cycle time relative to press output
- In-line automation vs. offline batch processing
We can supply deburring equipment alongside a new press purchase, or as a standalone addition to your existing fine blanking line.
Ready to discuss your fine blanking project?
Send us your part drawing and volume requirements — our engineers will respond with a tonnage recommendation and quotation within 24 hours.