Start With the Part, Not the Press
The decision is driven by how many distinct operations your finished part requires — blanking alone, or blanking plus forming, coining or additional piercing — not by press tonnage or throughput target alone.
When Single-Station Is the Right Call
- The part is a flat blank with no forming or coining features
- Piercing operations (if any) can be done in the same plane as the blank in one hit
- Lower tooling budget or shorter expected production run
When Multi-Station Earns Its Cost
- The part needs forming, coining or bending in addition to blanking
- Multiple piercing operations at different depths would otherwise require secondary handling
- High volume production where eliminating secondary operations meaningfully reduces per-part cost
A Practical Next Step
Send your part drawing — our applications engineer will identify which operations your part actually requires and recommend single- or multi-station tooling accordingly. See our multi-station press page for platform detail.